Volume 10, Number 5

The Role of UI GreenMetric as a Global Sustainable Rankings for Higher Education Institutions

Nyoman Suwartha, Mohammed Ali Berawi

Modelling of Hydrological Responses in the Upper Citarum Basin based on the Spatial Plan of West Java Province 2029 and Climate Change

Miga Magenika Julian, Alexander Brenning, Sven Kralisch, Manfred Fink

Estimating Water Availability using the SCS-CN Method based on Long Term Hydrologic Simulation and the Geographic Information System

Atie Tri Juniati, Dwita Sutjiningsih, Herr Soeryantono, Eko Kusratmoko

Performance of Encased Silica-Manganese Slag Stone Columns in Soft Marine Clay

S. Siva Gowri Prasad, P.V.V. Satyanarayana

Impact of Nano SiO2on the Properties of Cold-bonded Artificial Aggregates with Various Binders

Kolimi Shaiksha Vali, Bala Murugan

Improving Occupational Safety and Health in Footwear Home Industry through Implementation of ILO-PATRIS, NOSACQ-50 and Participatory Ergonomics: A Case Study

Paulus Sukapto, Johanna Renny Octavia, Putu Ayu Diah Pundarikasutra, Paulina Kus Ariningsih, Sani Susanto

Linking Basic Human Values, Risk Perception, Risk Behavior and Accident Rates: The Road to Occupational Safety

Iftikar Zahedi Sutalaksana, Siti Zsa Zsa Zakiyah, Ari Widyanti

Literature Review of Lean Manufacturing in Small and Medium-sized Enterprises

Laila Driouach, Khalid Zarbane, Zitouni Beidouri

A Novel Approach in Low-cost Motion Capture System using Color Descriptor and Stereo Webcam

Muhammad Imanullah, Eko Mulyanto Yuniarno, Adri Gabriel Sooai

A New Method for Building Low-Density-Parity-Check Codes

Tehami Mohammed Amine, Djebbari Ali

The Role of Laser Irradiance, Pulse Repetition Rate, and Liquid Media in the Synthesis of Gold Nanoparticles by the Laser Ablation Method using an Nd:YAG Laser 1064 nm at Low Energy

Ali Khumaeni, Heri Sutanto, Wahyu Setia Budi

Triacetin Production From Glycerol Using Heterogeneous Catalysts Prepared From Peat Clay

Noor Ridha Yanti, Hesty Heryani, Meilana Dharma Putra, Agung Nugroho

Cycle Tempo Power Simulation of the Variations in Heat Source Temperatures for an Organic Rankine Cycle Power Plant using R-134A Working Fluid

Muswar Muslim, Muhammad Idrus Alhamid, Nasruddin Nasruddin, Muhamad Yulianto, Edi Marzuki

Microstructure and Deformation of 57Fe17Cr25NiSi Austenitic Super Alloy after Arc Plasma Sintering

Mohammad Dani, Arbi Dimyati, Parikin , Damar Rastri Adhika, Aziz Khan Jahja, Andon Insani, Syahbuddin , Ching An Huang

Crystallization Kinetics Study of Impact Polypropylene Copolymer with Kenaf as Nucleating Agent and Reinforcement

Jaka Fajar Fatriansyah, Muhammad Joshua Yuriansyah Barmaki, Rahma Lailani, Mochamad Chalid

Optimizing the Performance of Microcomposites Li4Ti5O12/Sn with Sn and Li4Ti5O12/Sn@C Anode and Activated Carbon Content Variables for Lithium-ion Batteries

Bambang Priyono, Anne Zulfia Syahrial, Mohammad Ridho Nugraha, Dian Sepala, Faizah , Achmad Subhan

Evaluation of the 2-Axis Movement of a 5-Axis Gantry Robot for Welding Applications

Ario Sunar Baskoro, Reggi Prasetyo Kurniawan, Haikal

Dry Film Photoresist Application to a Printed Circuit Board (Pcb) using a Maskless Photolithography Method

Dedi Suwandi, Rofan Aziz, Agus Sifa, Emin Haris, Jos Istiyanto, Yudan Whulanza

Theoretical Prediction of Dynamic Axial Crushing on a Square Tube with Eight Holes Used as a Crush Initiator

Mohammad Malawat, Danardono Agus Sumarsono, Jos Istiyanto, Gatot Prayogo, Felix Dionisius

Effect of the Incline Angle of Propeller Boss Cap Fins (PBCF) on Ship Propeller Performance

Insanu Abdilla Cendikia Abar, I Ketut Aria Pria Utama

Progressive Collapse Analysis of the Local Elements and Ultimate Strength of a Ro-Ro Ship

Muhammad Zubair Muis Alie, Samuel Izaak Latumahina