Article by title
The Effect of Calcium Carbonate (CaCO3) Nanoparticles on the Flow through a Pentagon Spiral Pipe
Prof. Dr. Ir. Yanuar, M.Eng., M.Sc., Marcus Alberth Talahatu, Sealtial Mau, Kurniawan Teguh Waskito, Winda Wulandari
The Effect of Cation and Anion Species on the Transition and Adsorption Behaviors of Thermosensitive Sulfobetaine Gel-based Adsorbent
Eva Oktavia Ningrum, Shuji Sakohara, Takehiko Gotoh, Suprapto , Nurlaili Humaidah
The Effect of Competence and Organizational Commitment on Work Productivity of Indonesian Manufacturing Industries
Asep Sutarman, A Kadim, Askar Garad
The Effect of Double Shot Peening and Nitriding on the Die Soldering Behaviour of H13 and Cr-Mo-V Tool Steel
Myrna Ariati, Dwi Marta Nurjaya, Didi Rooscote
The Effect of Fiber Orientation and Crack on Dynamic Characteristics of a Unidirectional Composite Cantilevered Wing Plate
Faisal Ramadhan, Rianto Adhy Sasongko, Leonardo Gunawan, Mahesa Akbar, Djarot Widagdo
The Effect of Fiber Orientation and Stress Ratio on the Crack Growth Behavior of Fiber Metal Laminates (FMLs)
Anindito Purnowidodo, Khairul Anam, Djarot B. Darmadi, Ari Wahjudi
The Effect of Frequency Excitation and Cavity Shape Changes on the Vortex Ring Formation of a Synthetic Jet Actuator
Dewi Larasati, Harinaldi , Ramon Trisno
The Effect of Induced Magnetic Anisotrophy on the Hysteresis Parameter of Nano Barium Strontium Haxaferrite Prepared by Mechanical Alloying and Sonication
Novizal , Azwar Manaf, Musfirah Cahya Fajrah
The Effect of Information Technology, Competence, and Commitment to Service Quality and Implication on Customer Satisfaction
Evan Nugraha, Rini Mulyani Sari, Sutarman, Arif Yunan, Asep Kurniawan
The Effect of Magnesium Sulfate Addition on Volatile Solid Destruction and Chemical Oxygen Demand Reduction of Food Waste Anaerobic Digestion
Khansa Luqyana Hapsari, Firyal Tharifa, Setyo Sarwanto Moersidik, Sandyanto Adityosulindro, Cindy Rianti Priadi
The Effect of Malonic Acid and Succinic Acid on the Corrosion Behavior of Mg-5Zn in (Nh4)3PO4 and NaF
Yudi Nugraha Thaha, Nono Darsono, Muhammad Satrio Utomo, Djusman Sajuti, Ika Kartika
The Effect of Metal Loading on the Performance of Tri-metallic Supported Catalyst for Carbon Nanotubes Synthesis from Liquefied Petroleum Gas
Puguh Setyopratomo, Praswasti P.D.K. Wulan, Mahmud Sudibandriyo
The Effect of Mixed Biological Pretreatment and PEG 4000 on Reducing Sugar Production from Coffee Pulp Waste
Toto Iswanto, Nuniek Hendrianie, Maya Shovitri, Ali Altway, Tri Widjaja
The Effect of Ni on the Formation of Bainite in Fe-Ni Lateritic Steels through Semi-continuous Cooling Method
Fatayalkadri Citrawati, Robby Dwiwandono, Leksono Firmansyah
The Effect of Oleic Acid-Grafted Linear Low-Density Polyethylene as Compatibilizer on the Properties of Linear Low-Density Polyethylene/Cyclic Natural Rubber Blends
Ahmad Hafizullah Ritonga, Novesar Jamarun, Syukri Arief, Hermansyah Aziz, Denny Akbar Tanjung, Boy Isfa
The Effect of Orifice Shape on Convective Heat Transfer of an Impinging Synthetic Jet
Harinaldi , Christoforus Deberland, Damora Rhakasywi
The Effect of Oxidative Heat Treatment on the Preparation of Stainless Steel 304 and 316 as the Effective Catalytic Substrate for Carbon Nanotube Growth
Praswasti Wulan , Yuni Lestari
The Effect of Papain Enzyme Dosage on the Modification of Egg-yolk Lecithin Emulsifier Product through Enzymatic Hydrolysis Reaction
Setiadi Setiadi, Nurul Hidayah
The Effect of Plasma Actuator Placement on Drag Coefficient Reduction of Ahmed Body as an Aerodynamic Model
James Julian, Harinaldi , Budiarso , Revan Difitro, Parker Stefan
The Effect of Preparation Technology and the Complexing on the Service Properties of Self-extinguishing Copper(II) Coordinated Epoxy-amine Composites for Pouring Polymer Floors
Helen Lavrenyuk, Volodymyr-Petro Parhomenko, Borys Mykhalichko
About the Journal
- Editorial Board
- Focus and Scope
- Online Submissions
- Publication Policy
- Publication Ethics and Policy
- Author Guidelines
- List of Reviewers
Login
IJTech
Journal Metrics
IJTech is indexed in
