• Vol 6, No 6 (2015)
  • Mechanical Engineering

Tote Box Manufacturing Information Systems for 300 kCi Gamma Irradiators

Ario Sunar Baskoro, Edy Karyanta, Henky Suskito Nugroho

Corresponding email: ario@eng.ui.ac.id


Published at : 30 Dec 2015
IJtech : IJtech Vol 6, No 6 (2015)
DOI : https://doi.org/10.14716/ijtech.v6i6.1877

Cite this article as:

Baskoro, A.S., Karyanta, E., Nugroho, H.S., 2015. Tote Box Manufacturing Information Systems for 300 kCi Gamma Irradiators. International Journal of Technology. Volume 6(6), pp. 998-1005

238
Downloads
Ario Sunar Baskoro Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok 16424, Indonesia
Edy Karyanta Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok 16424, Indonesia
Henky Suskito Nugroho Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok 16424, Indonesia
Email to Corresponding Author

Abstract
image

manufacturing information system for the production of a tote box on the mechanical system of gamma irradiators 300 kCi facilities has been completed. Some factors that can support the successful development of the manufacturing industry are increasing mastery of technology, supported by the implementation of the management system of manufacturing, and precise manufacturing systems. Manufacturing activities to produce a tote box contain some of the information required by management. To get this information with conventional information systems take a long time. Some of the manufacturing processes for the production of a tote box include cutting, boring, machining, welding, bending, and assembling, supported by means of raw material inventory. Every part of the manufacturing process has some data that can be used as a source of information. This data includes information from the manufacturing process and a supply of raw materials into inputs for the manufacture of information systems with computer network systems. Input from the manufacturing process can be collected at any time with the help of the Microsoft Access software. Information systems for the production of tote boxes in this paper can specify the amount of production for one month for every part of the manufacturing process data and supply data of raw materials. With the creation of manufacturing information systems for tote box manufacturing production for gamma irradiators 300 kCi, the manufacturing information can be a source of accurate information so that management can more quickly determine the progress of the manufacturing process and be faster in making decisions, such as ordering the raw material, inspecting if production bottleneck occurs, etc.

Computer system, Gamma irradiators, Manufacturing information systems, Tote boxes

References

Cecelja, F., 2002. Manufacturing Information and Data System. Penton Press: London

Gaspersz, V., 2001. Desain Sistem Manufaktur Menggunakan ERP System: Suatu Pendekatan Praktis. Jurnal Siasat Bisnis (JSB), Volume 1(6), pp. 77–88

Kalpakjian, K., Schmid, S.R., 2009. Manufacturing Engineering and Technology. Amerika Serikat: Prentice Hall

Kumar, S.A., 2008. Production and Operation Management. India: New Age International Publishers

Maiga, A.S., Nilsson, A., Jacobs, F.A., 2014. Assessing the Interaction Effect of Cost Control Systems and Information Technology Integration on Manufacturing Plant Financial Performance. The British Accounting Review, Volume 46, pp. 77–90

MMIndustri, 2014. Manufaktur Indonesia Terkuat di ASEAN. Available online at http://www.mmindustri.co.id/manufaktur-indonesia-terkuat-di-asean, Accessed on 26 October 2014

Setyadi, B.K., 2007. Analisis Perkembangan Kemajuan Teknologi Sektor Industri Manufaktur di Indonesia. Postgraduate Thesis, Universitas Indonesia

Talib, H., 2014. Panduan Lengkap MS Access. Jakarta: Alex Media Computindo

Table of Contents